Free Economy Shipping on Every Order

Tech RSS

Our PM to PM adaptor can be used for a number of situations, but is commonly used for upgrading to a larger 203mm rotor size.  It will fit on most forks that are already set up for a 180mm rotor and allow you to fit a 203mm rotor. However, in some cases it does not move the caliper far enough on its own to clear the rotor. This is true for any Fox 36 fork, which typically requires a specific adaptor.  To adjust for this, and adopt this adaptor to your needs, the conical washers that are included can be used...

Read more

When you install a new set of brake pads on your mountain bike, or disc brake equipped bike, you'll want to bed the pads in. During manufacturing the surface of each brake pad is left slightly rough. The process of bedding in your pads transfers a small amount of brake pad material to your rotor so that your new pads can sit flush, with as much of the brake pad contacting the rotor as possible. It also provides a uniform layer of brake material on the rotor, helping to minimize squealing and create consistent power.  Bedding in your pads creates a...

Read more